Print fan cover/shroud for MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part covers the print fan for safety.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 136
- Wydruki
- 11
- Wyświetlenia
- 603
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part covers the print fan mainly for safety.
There are two variations:
MK4 print fan cover-A:
This version is the simplest design. You need an M3x16 to install it. Printing is very easy, and no support is required.
MK4 print fan cover-B:
This version has a counterbore to sink the M3 bolt head down. You need an M3x12. The print is easy. You do not need support. To avoid support, a 0.2 mm film covers the hole in the model. This is intentional. You need to poke it through with a small Allen key or something after printing.
I also added another model, MK4 print fan cover-B mod, to accommodate an improved fan door like this one.