1 / 8
IKEA Skadis charger holder Parkside 12V
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Skadis charger holder Parkside 12V
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 294
- Wydruki
- 4
- Wyświetlenia
- 1012
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 8)Remiksy (0)Kolekcje (86)Powiązane
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first putting the holder on the IKEA Skadis plate and then the charger on it.