1 / 2
Pro-Ject Debut line Lid Hinge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement hinge for smoother hinging operation.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
The original hinge felt really jank and was either too tight or too loose.
Especially if it's poorly assembled, as in my case, and starts ripping itself out.
This version doesn't have any tightening feature so you might need to adjust the grub screw slightly or change the inner diameter. (Or scale the model slightly in slicer)
For me the 6.15 inner diameter version worked best.
I've also included model with recessed back around screw holes, incase your inserts in the wood base aren't flush. Just be careful not to overtighten the screws.