Trashbin side mount for K1 and K1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side attachment of trashbin for K1 series
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 555
- Wydruki
- 4
- Wyświetlenia
- 4828
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I printed a small and compact trash can (link below), but it kept falling off the table, so I figured out how to fix it...
The part is definitely good for Creality K1 and K1c, not compatible with K1 Max!
It can be attached to the upper screws of the side panel, the uploaded STL is made for the upper left part, you need mirroring the model for right side attachment! The original screws are short for fixing, 2 pcs M3x8 are needed instead.
When printed as shown in the picture, no support is required! Recommended with 0.2 mm layer height, 20% or more infill settings. PLA printing quickly deformed for me after emptying 2-3 times, so PETG or a stronger material is recommended!
Trashbin: https://www.printables.com/model/139262-filament-trash/files
I hope it helps you as much as it helped me! Cheers!