1 / 13
MagSafe stand compatible with Belkin MagSafe charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MagSafe stand to use with Belkin MagSafe charger
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted a way to use my owned Belkin Magsafe charger along with a base so I dont have to purchase a expensive device also.
Print Structions
All layers at 0.2, 10% infill, honeycomb.
Paint supports below “lower pin” of arm.
UPDATE 2024-05-27
Added a new version for the Base, that allows to use 5/16 Nuts, the measures for the nuts are:
Nut screw: 5/16 (not needed, but a good start point to search)
Nut circunscript Diameter: 12.35
Nut height: 6.6 mm
When printing, please ensure you pause before the layer that patches the holes.
