1 / 2
Drying Shelf for Sunlu S4 Filament Dryer — zdjęcie 1
1 / 2

Drying Shelf for Sunlu S4 Filament Dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A shelf to provide flat space inside the Sunlu S4 Dryer, to dry objects such as desiccant packs.

Ocena
5 / 5
Polubienia
28
Pobrania
144
Wydruki
1
Wyświetlenia
954
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by model on MakerWorld by @mkersjes, but redrawn from scratch to provide stiffer frame (less sag) and reduce size of the feet.

Drawn as solid, but the included 3MF file employs layer range modifiers to eliminate top/bottom solid layers, resulting in an open honeycomb infill for ventilation.   

I printed in ABS, but highly recommend PC!  With some objects on the shelf, even ABS will start to sag and deform when the dryer is at 70C, because the air exiting the heater is a bit hotter than that.  PLA is not suitable.
 

*** 19-May-2024:  Updated design to add support leg at center of interior edge.


Sketchup design file included in case anyone wants to make further modifications!

Tagi