1 / 3
Underwood 6 Feet and Carriage Return Bumper replacements — zdjęcie 1
1 / 3

Underwood 6 Feet and Carriage Return Bumper replacements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacements for the feet and carriage return bumpers for the Underwood Standard 6 typewriter

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement feet and return lever bumpers for the Underwood 6 model typewriter.

   Print 4 of UW6_foot
   Print 2 of UW6_bumper

No support needed since internal overhang is small and gradual enough in the small space. The overhang is due to the need to capture the screw head.

85A or higher shore hardness TPU. Use a high infill. I use 85%, which is effectively 100 for these small parts. Too low and the parts don't hold up under compression.

The feet replace the rubber only. If you are missing the felt or metal cap these will not be all that useful. 
 

Tagi