Underwood 6 Feet and Carriage Return Bumper replacements
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacements for the feet and carriage return bumpers for the Underwood Standard 6 typewriter
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Replacement feet and return lever bumpers for the Underwood 6 model typewriter.
Print 4 of UW6_foot
Print 2 of UW6_bumper
No support needed since internal overhang is small and gradual enough in the small space. The overhang is due to the need to capture the screw head.
85A or higher shore hardness TPU. Use a high infill. I use 85%, which is effectively 100 for these small parts. Too low and the parts don't hold up under compression.
The feet replace the rubber only. If you are missing the felt or metal cap these will not be all that useful.