Modern Gunsafe Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to store your modern firearms side by side.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
No More scratching or having to remove all your guns to get to the back one.
This is a three piece upgrade that allows you to retrofit your safe to store your long guns.
There are three pieces
-Base (PETG)
-Holder (PETG)
-Pad (TPU)
I added pads that be printed on a Multi material printer or one a single extruder.
For single extruder machines, print the PETG and TPU parts seperatly and simply slide it in.
You can use a dab of super glue to secure it but I didnt have to.
PRINT WITH A 0.4mm Nozzle otherwise nothing will fit.
I attatched the Fusion360 project file so you can edit the holders to make then shorter or narrower depending on your guns.
I have the tractor supply winchester 36 gun it fits about 4 long guns. The gap betweent the vertical dividers is 14 inches, I left 1 inch of wiggle room to get it just right.
To attatch the wall holders I used a combination of velcro on the back and also a strap that I stapled in place on the sheet rock.
