1 / 8
12mm coverslip centrifuge adapters for 50ml falcon tubes — zdjęcie 1
1 / 8

12mm coverslip centrifuge adapters for 50ml falcon tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

adapter to add to 50ml falcon tubes for centrifugation steps with a little notch for tweezers

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remove the lid of a 50ml falcon tube and add the adapter to the tube.

Add the 12mm coverslip in the well and put the insert ring on top to prevent the coverslip from floating.

You can use the notch to remove the coverslip from the well with tweezers

 

Disclaimer: Use it at your own risk. If there are any damaged caused by this, insurances probably won't cover this, as well as manufacturers. Don't use if broken or damaged.

 

I only use it for low g applications and only for short times.

Make sure the centrifuge is perfectly balanced, by weighing the inserts with the tubes.

printed in ABS at 0.1mm layer height with supports for the overhang on the edge.

100% infill to make it watertight.

You can probably also use PET filaments

Always use in pairs.

Tagi