1 / 8
12mm coverslip centrifuge adapters for 50ml falcon tubes — image 1
1 / 8

12mm coverslip centrifuge adapters for 50ml falcon tubes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

adapter to add to 50ml falcon tubes for centrifugation steps with a little notch for tweezers

Rating
0 / 5
Likes
4
Downloads
16
Makes
0
Views
271
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Remove the lid of a 50ml falcon tube and add the adapter to the tube.

Add the 12mm coverslip in the well and put the insert ring on top to prevent the coverslip from floating.

You can use the notch to remove the coverslip from the well with tweezers

 

Disclaimer: Use it at your own risk. If there are any damaged caused by this, insurances probably won't cover this, as well as manufacturers. Don't use if broken or damaged.

 

I only use it for low g applications and only for short times.

Make sure the centrifuge is perfectly balanced, by weighing the inserts with the tubes.

printed in ABS at 0.1mm layer height with supports for the overhang on the edge.

100% infill to make it watertight.

You can probably also use PET filaments

Always use in pairs.

Tags