149 models
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Ideally print in PC but works with PETG. Use at own risk.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Table stand for a 150 ml falcon tube with a conical base. Bottle diameter 60.4 mm
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…
One of my very first prints, post-processing may be required for shaft parts to fit (light sanding). I updated the files so that sanding won't be necessary. This hand cranked centrifuge takes 5 mL tubes and can spin liquid down to avoid…
This is a rack designed for robotic experiments with vials. It has high level of fit tolerance so it's easier to teleoperate robots to put the vials in this rack.
Designed for PHYSIQUE SANS FRONTIÈRE , a division of the French Society of Physics . This 3D printed centrifuge uses a drone motor to spin 8 1.5ml Eppendorf tubes. It is also designed to be very cheap and accomodating of different parts…
A rack for 1.5mL centrifuge tubes, capable of holding up to 75 tubes. There are two versions: one with handles and one without. I'm experimenting with a version that is in vase mode for decreased filament usage. Fits on most build plates.…
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to…
In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…
Practical manual vegetable dryer, designed for children, as functional as the original size one, can be scaled to bigger size without compromising its functionality once printed
This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…
Geared Hand-Crank Centrifuge A fully 3D-printable, hand-powered centrifuge driven by a simple gear system. No motor. No electronics. Just turn the handle and let the gears do the work! And yes, it’s super fidgety and incredibly satisfying…
These designs are tube holders for 1.5, 2 and 5 ml micro-centrifuge tubes. It is designed to hold individual tubes straight during weighting. I also use it to hold 5ml tubes on a magnetic stirrer. The design objectives where to make it…
Print with supports: there are steep overhangs in the eyes and on the backside of the bulb.
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
A colleague of mine needed a lot of centrifuge tube holders quickly for the lab, so I designed this. Printing in ‘vase mode’ with 0.2 layer height and 50 mm/s speed, these came out in about 45 minutes using just 8g filament, so you can…
This design is a series of holders for 50ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. It can print without supports but you should make sure to have a very good bed adhesion. The shape is designed to allow to see the base…
Tired of struggling with scattered tubes and cluttered workspaces? Say hello to efficiency and convenience with our premium 36-Centrifuge Tube Rack! Designed to streamline your laboratory workflow, this rack offers ample space to securely…
Designed this funnel for used 50ml centrifuge tubes that have become ubiquitous in the specialty coffee community. Tolerances are not tight so you should not need to worry about resizing. (External diameter of tip of funnel is about…
A 3D-printed version of the Paperfuge, based on ideas presented the following paper: http://www.nature.com/articles/s41551-016-0009 The thin adapter pieces fit around a 1.7ml microfuge tube, which then sits in the grooves in the model.…
Inspired by thing:1483 I made an add-on to turn your dremeltool into a centrifuge. It has moving parts, but does not need support during printing or assembly afterwards. The trick to do this is use ball-and-socket joints, with a 0.2 mm…
Build a centrifuge out of lego technic or Mindstorms and attach this head on a shaft. Please cover the whole thing with some box for protection. Print instructions Try to print with denser filling. This part needs to be solid.
The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…
This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…
A holder for up to seven 50 ml centrifuge tubes. I use the seven centrifuge tubes to prepare my water soluble supplements for the week. Maybe its useful for someone. Doesn't need supports to be printed. Edit: The holder fits 50 ml…
Geared / hand-powered centrifuge, with triangle bit adapter and rotor. This is for spinning down liquid in a tube for MinION sequencing, so should only require a few tens or hundreds of Gs. For a hand-powered design with a faster spin,…
Print without supports.
Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…
0.2 mL PCR Tube Rotor This is an alternate rotor designed for a benchtop mini-microcentrifuge. It can hold standard 0.2 mL PCR tubes and works well with individual tubes or 8-tube strips. For a mini-microcdentrifuge like the the one…
Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.
This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…
There is a version with and without handles. Holds 48 0.2ml tubes, 40 0.5ml tubes, and 36 1.5/2ml tubes. The bottom of each well tapers to a point to help tubes sit upright. The 0.2ml tubes are arranged in rows of 8 spaced 9mm apart to…
The STL files are just repaired so that they can be used with Slic3r. I'm using a Digispark instead of an Arduino for controlling the speed, you can find source and instructions at https://github.com/reefab/diybio_centrifuge Category:…
Stepper motor driven centrifuge for spinning down cell culture samples. Variable RPM control without programming from 0-1000 RPM.
50ml Falcon tube insert to use in centrifugation applications. Printed with a resin printer (Printed vertically with an 20 degree tilt). I added another version which prints well with fdm printers as well (printed laying flat) Made to…
Revolutionize your calibration process with our Centrifuge Rack designed specifically for pH and ORP standards. This compact yet robust rack offers a convenient and organized solution for preparing and storing calibration solutions in…
Tube holder for three microcentrifuge tubes
<Expanded description coming soon>
Stand for holding individual 50ml centrifuge tubes for experiments or storage.
This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…
This centrifuge was designed by Dr Giorgio Romagna, with whom I share my Printables account and my passion for 3D printing. The idea for the centrifuge came from a toy I used to play with as a child. It was made from just a thread and a…
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC, particularly when working…
This model was designed to be used in a “LD-5 Electronic Centrifuge” fixed angle rotor. The user's manual indicates a maximum relative centrifugal force of 2395*g. Print instructions: UltiMaker Polycarbonate, no need for supports, infill…
Portable Centrifuge This was mainly developed for manual hand powered, where the idea is to have a string attached to the inner part, and pull to rotate. The spinner is made for 6 pieces microcentrifuge tubes, 1.5 ml/2 ml. With the…
This is a holder for centrifuge tubes. Placing the lid on top of the holder allows you to hold smaller tubes. No supports are needed, just print the lid with offset portion face up.
A simple adapter for laboratory centrifuges. Easy to print, any material is perfect (unless it has to be autoclaved). Printed in PLA for room temperature centrifuges. Printed with 0.2 mm layer height No supports If the plate is well…
A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…
Keep your 50ml centrifuge tubes clueless, I mean in the dark. Print in black PETG. With less flexible filaments it may be difficult to slide the cap on and off. Fairly wide tolerances, should accommodate most standard 50ml tubes.
A stackable centrifuge tube rack which holds 50 tubes with a diameter of 7 mm (0.5 mL tubes). The rack is printed in two parts. The top part needs to be glued in the base to construct the rack.
Ever feel like you're losing track of probes, buffers, and washing tubes during pH calibration? This all-in-one pH Probe Calibration Station can be your new best friend. It keeps everything organized and handy in one compact unit. The top…
An adapter to centrifuge 1.5 mL tubes in 15 mL tube slots. This is useful, because most centrifuges that fit 1.5 mL tubes are not swinging bucket centrifuges.
This is a variable speed centrifuge with speed control and readout. No programming or soldering required. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed…
Single Centrifuge Tube Stand Compact and stackable centrifuge tube stands. The wide, stable base helps prevent tipping, while the open-sided cradle makes it easy to insert, remove, and view tube contents—ideal for quick handling during…
IMPORTANT: I have only tested this centrifuging at 100 x g. I DO NOT recommend centrifuging 3D printed components at high speeds. This insert is designed allow centrifuging of Corex No. 8441 glass round-bottom 15 mL tubes in an Eppendorf…
The referenced original device seems to be not supported any more and spare parts seem not to be available any more. "Thermo Scientific Sorvall Evolution RC Superspeed Centrifuge"…
The adapter is the same width as 1.5ml and 2ml eppendorf tubes and is designed to hold 0.2ml pcr tubes for use in a microcentrifuge. The hole has a diameter of 7mm. The diameter is about 10mm throughout the bottom and about 13mm at the…
Printed with DO3D Silk Multicolored Rainbow PLA. Holds 8 x 50ml tubes and 4 x 14ml tubes. Has space for text that can be added using PrusaSlicer (First flip the top part, so the text you add will point upwards). The parts should be glued…
Stackable centrifuge holder great for organization it can hold 6 15ml centrifuge tubes and 2 50ml centrifuge tubes.
A holder for six centrifuge tubes. I use it for coffee bean dosing. Uses four M3 screws that should tap into the plastic.
A mostly printed centrifuge with variable speed control, speed readout, safety features, and improved rigidity. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
This centrifuge tube stand was designed in collaboration with a colleague from the microbiology lab at university of zurich It has 8 places for different sized centrifuge tubes. The first front row was created for the centrifuge Eppendorf…
A centrifuge adapter for the Eppendorf 5810 20 5 ml tubes and fit into the A-4-62 rotor. Would recommend using 20% infill with 3-4 layers to ensure it can withstand centrifugation. Currently tested up to 2000 RPM with no issues using…
A centrifuge is a laboratory instrument used for separation of the materials through filtration and sedimentation. Especially where there is a requirement for chemical or material analyses. The basic operation principle of the centrifuge…
This is used for weighing the contents of one mini centrifuge tube
The issue In the lab, photosensitive compounds are often used for a variety of reasons. The common approach is to protect these compounds with opaque containers, but these containers are usually made from transparent materials. As a…
UPDATE: 2/13/25: Added a sliding Clamp so that other size bottles can be used. The rest of the parts remain the same. The Clamp snaps onto the arm. I printed it in PETG. (Thanks to @Sir-Miss-Alot for the idea!)…
This centrifuge plate was created to hold a special proprietary tube strips that are used with the IonTorrent S5 Genexus system. The tube strips do not fit into any known existing centrifuge plates due to the strip size and tube shapes.…
I use the centrifuge tubes to pre mix my supplements for the week. This way I just have to add water (to around 45 ml) stick it in the massager and give it a go on full speed for a few seconds. The model needs to be printed in this…
Adapts PCR tubes to fit into standard 1.5 ml centrifuge rotors. Have been tested to withstand up-to 6000 G
I designed this box to put my Eppendorf tubes in during incubation, this allows me to lie the tube on its side in the shaker without the worry of the tube popping open. Can print without supports if oriented in the correct way. I…
This is an adapter that holds two 96 well qPCR plates for centrifugation. This may work with select PCR plates as well. A support spacer is placed on the drive below the adapter. I printed the adapter with tree supports enabled. I created…
This holder is meant to hold 5 15ML Centrifuge Tubes for laboratory work.
15 ML centrifuge tube holder for lab work.
This is a lid for Grant PMHT PSC24N thermo-shaker microcentrifuge (Eppendorf) tube incubator. It's handy for keeping tubes nicely heated and/or minimising environmental contamination if you're using open tubes. Two models are attached, a…
This holder can hold 16 50 mL tubes. Adjustable to 16 15 mL tubes or 8 15 mL and 8 50 mL tubes.
This is a simple adapter to fit a 250ml flask in a larger rotor. I have printed with PETG and tested up to 300g. Be careful using this with higher speeds. Use it at your own risk. Pay attention to material properties. Do not print with…
I love having multiple coffees on hand, and now I’ve found a nice way to keep things organized. I store 20g of coffee in each centrifuge tube. For every bag of coffee, I have a box under my desk where I keep all the filled centrifuge…
Centrifuge with truncated octahedron gearing to reduce slip
We needed insert for our centrifuge but long deliverytime and they are also relatively expencive i just made one. My first version was printed in PLA and its working as expected. Regarding cleaning you could use different filament.…
A model made for Contest: Lab accessories for MSF to help labs out there get tools/items. Comes with washing tub for tools and test tube holders.
Can hold 9 microcentrifuge tubes (1.5-2 ml). 3x3 array. Portable!
WARNING- USE AT OWN RISK! This is an experimental adaptor to allow a capillary tube to sit in a cup designed to hold a 15ml test tube, to be used in a bench-top clinical centrifuge. After breaking a few capillary tubes, I figured that the…
Tube holder for SW60 rotor bucket beckman ultracentrifuge I needed a holder for the SW60 beckman centrifuge buckets so that we could easily balance them. Printed in PLA, infil 30% with supports
This holder can be used to cool a single 50 ml centrifuge tube in a Sarstedt Biosphere Ika tip box filled with ice. It was intended to use it for sonication of cooled samples. It fits tight inside the box, so maybe also the use on top of…
tube stand for classroom observations
I have had another go at the design of a centrifuge bucket. I'm much happier with this version, if nothing else for the reason that the inside is round. I printed this in PLA CF and it came out quite well. I used ironing on the top which…
I needed to vortex multiple centrifuge tubes for 10 min each so I decided to rework this into a tool to be able to vortex 9 in parallel saving me a lot of time. The tubes simply slide in to the desired height and then the whole carrousel…
The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes and 5 mL centrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC,…
Support open source film development tools: https://ko-fi.com/nordiclab 📷 Behind the scenes & photography: https://www.instagram.com/sasha_nordiclab 🛠 Discord: https://discord.gg/JCAADnXDAA 💁 ✉ Darkroom Newsletter:…
This is a custom-designed holder for centrifuge tubes, tailored for use with plasma separation machines. It was created to ensure stable vertical support for standard laboratory tubes during operation or storage. The design prioritizes…
I don't need to spin test tubes, so I redesigned the test tube attachment to be a simple open box-type container, specifically to be matched up with my separate shaker container. See photos of parts and assembly. Kudos to the original…
