Eppendorf (Microcentrifuge) Tube Rack
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.51 – €3.07 net (excluding VAT)
For file: Eppendorf Tube Rack - 40_4w_0.6n_0.25mm_PETG_MK3.9_1h52m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.79 excluding VAT (range midpoint).
- Weight reported by the author
- 58 g
- Print time reported by the author
- 1.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Eppendorf tube rack holds 1.5 mL or similar sized microcentrifuge tubes. A spring mechanism holds the tubes.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 476
- Makes
- 1
- Views
- 1,898
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model (https://www.printables.com/model/310767). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing on print or post-print. So I designed this model from the ground up to address the issues I was having. But I did want to give credit for the inspiration. I wasn't sure if this should be considered a remix since I did not actually modify the original model.
Print with springs down on the bed (legs up).
This is a modular design. My colleagues initially wanted 40 tube racks so that is what I designed originally. I have since added multiple rack sizes. Note that some racks are 4 wide and others are 5 wide. There are 2 versions of the 40 tube rack now, the original 4 wide rack and now a 5 wide rack. Since the spring component of the module is modular, any size rack could be created however I think the selection should cover most users' needs.