Counting matching models…
The EDA (eye drop assist) consists of an eyepiece and pliers and allows easy positioning of the eye drop vial (single dose unit; EDO in german) in front of the eye. Long handles in an ergonomic shape allow for easy dosage of pressure on…
The Vial Holder centers the vial, allowing you to inject Tirzepatide from an autoinjector into a vial. Filament: PTEG Support: Not Required Infill: 15%
This rack was designed to fit inside of a small wooden box to hold and display vials that contain perfume samples. The rack measures 100mmx102mm, just under 4" square, and holds 16 of these small vials. The vials can be up to 12.5mm in…
Modified version of a Insulin Transport Pot by PHM88, remixed for use with common estradiol vials. It has been tested with various 10 milliliter multi-dose injectable vials. This container for your estrogen vial ensures that your vial…
This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.
Designed to hold these glass bottles at the perfect angle to make an agar slant. Simply fill with 5ml of agar, loosen lids, place a few inside a jar and pressure cook for 10 minutes. Once pressure cooked let cool down to 120-130f then…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
Spare key for Vialli towel, soap and toilet paper dispenser. Made from a scan of the original one
A simple tray design to hold 3mL peptide vials. Smoothed surfaces for ergonomics — and features for vibration isolation and tip prevention! Shown here printed in TPU95A. The design is not specialized for 16.5mm diameter vials so it can be…
Friend of mine is an EMT and saw a similar model for a different case than is used at his ambulance company so I threw this together for him Has not been tested so please send your feedback so I can tweak it if necessary Designed for 10ml…
This vial tray was designed to be compact, for a glovebox where space is scarce, while allowing it to be handled with glovebox gloves. It holds eleven 10 mL vials of 15mm diameter, but it could be scaled to any size in your slicer. The…
"Pain is temporary. Bacta is eternal." Straight from the medbays of the Outer Rim, this vial is your ticket to immersive Star Wars cosplay – whether you're roleplaying a grizzled rebel medic, an Imperial field surgeon, or just someone who…
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
Microplate holder for 20 mm vials 2 x 4 grid Vial diameter: 27.0 mm Vial depth: 21 mm Height: 25.3 mm Depth: 127.7 mm Width: 85.5 mm Chamfer length: 5 mm Spacing between holes: 30 mm Spacing between long edge and hole: 14 mm Spacing…
Just a simple vial holder for 24 (6x4) HPLC 2mL vials with holes a) to enable sonication b) to save filament and reduce printing time.
Fillable vial for injectable solution for medical education and nursing simulation in two size
🧪🗓 Weekly (Supplement) Vial Tray — 14 × 15 ml + Cap Storage This is a 3D printed weekly tray for 14 × 15 ml / 0.5 oz glass sample vials (≈ Ø23 mm ). It’s designed as a simple “ fill once per week ” system for powders like psyllium husk ,…
I take the Eli Lilly Direct Zepbound with the 0.5 ml Vials And 1 ml Syringe. I have a tremor and I broke 2 needles and wasted a half-vial of juice (ouch, expensive). My daughter has no tremor but she uses it also. The vial snaps in…
A holder designed for boron glass vials with a polypropylene cap. These materials are used in laboratories and medical devices due to their specific properties. Consider this when selecting the right filament for printing. My settings:…
Holder for 6x10 vials with 13mm diameter, tougher if printed from PETG. If you encounter issues printing without supports, try printing the version with supports.
A note of caution: Safety caps are put on pill bottles for a good reason - to help prevent children from eating the "candy" in the bottle - so don't remove this important safety feature from a bottle containing medications. I like to…
Used generic PETG filament. A nice snug fit. Setting can be adjusted for a more aesthetic look.
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
I made protective case for one Penfil vial of insulin becose I was sick of that, that every that I found was need TPU elements, or it was just box made from PLA (or other material) and doesn't protect vial at all. That case was tested…
I picked up some glass vials off Amazon and wanted to make a stand for them. The stand holds 6 vials, can be printed without supports, and works great in PLA. Vials are listed as "80ml Glass vials 14pcs,With aluminum screw cap14pcs Clear…
These inserts provide a simple color-coding system for cryogenic samples stored in LN₂ . They are designed to press into the top recess of the cap on the following cryovials: Thermo Scientific Nunc™ Biobanking and Cell Culture Cryogenic…
We all have that vial of nozzle needles rolling around. I wanted a holder for mine that could be mounted on a rack above my printers alongside my other commonly used tools. This will hold a vial that is 13mm or less in diameter. I am…
What is it? Built to pair with my " Magnetic Injection Assistant ", this securely holds medication vials inline and at the correct depth while drawing your meds into a syringe. How to use: Add your vial to the Carrier (now is also a good…
I got tired of juggling pen bodies and ink vials so I made these stabilizing stands. Also included is the OpenSCAD source to adapt it to other pen diameters
This is a rack designed for robotic experiments with vials. It has high level of fit tolerance so it's easier to teleoperate robots to put the vials in this rack.
My mother uses a variety of different eye drops, and over the years Cequa and Systane are two of the products she has used. She asked me for something that would hold the disposable vials vertically (I'm not exactly sure why), and after a…
The design was developed to ensure a tight fit between the components. This isn't just an additional base for three or five stands—it's a connecting element designed to ensure stability during use. Therefore, this design isn't intended…
What should i say here? - I designed this clamp for multiple usecases like clamping your Fingers, Postcards, Nipples or Tongue. ************************************** Check out the new version here:…
I did this O scale model of the Venture Siemens Vial Rail Car. If someone is interested to make it, let me know. I can do a sketch with numbers to indicate where to fix each decal. For a O scale, the carbody needs to be printed in 3 parts…
This is an additional upgrade to 3D Printy's Lunar Lighthouse Puzzle Box. It uses a 2x12mm vial of tritium gas to make the lamp room self-illuminating. You can check out my larger suite of upgrades here:…
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. May not be what you need but if it is…
Remix to include Weber Workshop resin vials
Build instructions as per the original Model. 2 x M3 x 20 mm screws are required.
This is my attempt at the bacta vial seen (and used plenty) in the video game Star Wars Outlaws. I split the file into 4 pieces, top, mid, bottom and insides. The “insides” being the “bacta fluid” and “glass window”. I've also allowed for…
Eye Drop Vial Travel Container – Screw Top (Holds 4 Refresh Plus Vials) Compact eye drop vial travel container with a screw-top lid , designed to hold four Refresh Plus single-use vials . Keeps vials protected, organized, and securely…
This is our Vial Cap B design for the Pioreactor. It has 24-400 threads, and four barbs for 3/32 tubes (but other sizes may fit) Printing Important: only use high-temperature plastics if you plan to heat-sterilize this cap. We use Prusa's…
The EDA (eye drop assist) consists of an eyepiece and pliers and allows easy positioning of the eye drop vial (single dose unit; EDO in german) in front of the eye. Long handles in an ergonomic shape allow for easy dosage of pressure on…
The Vial Holder centers the vial, allowing you to inject Tirzepatide from an autoinjector into a vial. Filament: PTEG Support: Not Required Infill: 15%
This rack was designed to fit inside of a small wooden box to hold and display vials that contain perfume samples. The rack measures 100mmx102mm, just under 4" square, and holds 16 of these small vials. The vials can be up to 12.5mm in…
Right out of the pages of the Skybound comics, here's Beachcomber's Energon Vial! This miniscule model is sized to fit right in Beachcomber's hand, so he or any other bot can hold it. Definitely a model which you would want to print at…
Box with sliding lid to hold small glass insulin bottles (vials). Keeps bottles separate so they don’t clank together No supports, brim, or raft required.
You'll need 4 or 8 4x2mm magnets depending on the container variant you choose. You can buy them here No supports needed
With this, if you need to draw a viscous medication, such as something oil based, into a small gauge needle (which normally can take a while), you can set your vial, set your syringe, and pull the plunger.
I specifically created this to hold 15mL vials for plant propagation, that I can put in a 15mm magnet into the back. Can be resized for different vial sizes or magnet sizes width of loop is fit to hold 15mL tubes hole in back is meant to…
This is a very handy configurable rack for creating an array of almost any size. The hole size, depth, number of rows/columns is all configurable. Print instructions No supports needed. Just use OpenSCAD to prepare the model, export as…
The stackable sample organizer is meant for PELCO® Vial and Cap, 30mm L x 12mm O.D., 2ml (TedPella 21449). It is designed for 10x10x.5 mm samples, and the samples are held so they cannot touch the sides of the transport tubes.
Includes a small name plate that you can add any text to This can fit 4 1ml vials and 1 5ml vial Note: The holes are sized from 25mm and 16mm diameter vials Printed on a BambuLab A1 0.20 layer height 15% infill Standard supports are…
This is the first version of a print in place box with latching lid for the storage of vials and small bottles. I designed it to hold small bottles of essential oils. In the parameter dialog of Fusion 360 you can specify no of rows and…
The couplers in the image were printed on an MK4S using SainSmart Shore 95A TPU. This type of TPU is flexible enough to wrap around the opening of the vial (tip: insert the vial into the coupler at an angle), but firm enough to hold it…
This design is a modular base plate for glass vials. I use it to make sure some chemicals stay ordered when moving around and to organize them in a fridge. The plates have different numbers of slots and can be assembled together using the…
Modified version of a Insulin Transport Pot by PHM88, remixed for use with common estradiol vials. It has been tested with various 10 milliliter multi-dose injectable vials. This container for your estrogen vial ensures that your vial…
Holds a 5ml plastic vial of ink to help prevent accidental tipping.
This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.
This print can be modified to choose any number of rows and columns (but you will need an OnShape account to do this - free OnShape accounts are available). In addition, I have included a number of different row/column combinations here,…
This collection is a vial holder set for material sample showcase printed with PLA. It can be used as a sample holder to showcase materials and small parts for your activity, exhibition, course, or research. This collection contains two…
A 3D periodic table that arranges all 118 elements in a helical tube rather than a flat grid, with laser-cut element labels and vials for physically storing samples. Greatly inspired by this Instructable . Concept The layout matches a…
A 3D periodic table that arranges all 118 elements in a helical tube rather than a flat grid, with laser-cut element labels and vials for physically storing samples. Greatly inspired by this Instructable . Concept The layout matches a…
Standalone palette for 15 headspace vials (20 mm diameter) with a hole at the bottom for washing or spill release.
This simple insulin tray is designed to fit in one of the selves of a refrigerator. It holds 8 glass vials of insulin. I am not sure how standard the measurements of these vials are, the vials I modelled this for are the ones available in…
This insulin vial holder has space for 5 vials + and AirTag or 6 vials. The AirTag is simply press fit but your mileage might vary. I will try and upload a version with a lid for the AirTag slot. The lid fits magnetically on the case, you…
A 3D model of a shimmer vial inspired by Arcane , with a glass body showing swirling purple liquid and metallic details on the body. Parts and Materials 140mm tube with a 22mm diameter (if unavaliable, the model with have to be…
This holds eight 10ml sample vials. Perfect fit. I did 15% Infill.
I found that it is way cleaner to use oil vials rather than candles, but the chanukiah I have is meant to hold candles and was not compatible with oil vials, so I modeled this adapter that has a pole with the same diameter as the candles,…
Simple holder for three vials. Vial diameter: up to 16 mm Vial height - >15 mm (glass piece) Print settings: Infill 10% Nozzle 0.4 mm Layer: 0.2 mm
hello! This is a rugged box with an inserts to organize medicine vials like those used to hold compounded semaglutide, tirzepetide, retatrutide, peptides, K-beauty, TRT, Ozempic, Mounjaro, etc. It uses the Gridfinity system. It keeps your…
Neuropozyne vial from Deus Ex: Mankind Divided . I modeled this with resin printers in mind, but it can probably also be printed on FDM printers. If desired, the plug can be omitted, unless you really want to show the featureless bottom…
Updated 2025/1/31: Parameterized FreeCAD© model designed to change length×width (baseLength and baseWidth) based on vessel diameter and desired spacing between vessels. Height parameter (baseHeight) is based on the height of vessel…
Vial holder for 4 vials Size: 16 x 35mm (2ml) 22 x 40mm (6ml) 25.25 x 53.5mm (15ml) 25.7 x57mm (15ml)
I needed a storage solution that wasn't going to take a week to print, so I got a basket at Daiso for $1.75 which had the perfect size to store ink vials. The insert holds 15 vials, and the basket holds 4 inserts for a total of 60 ink…
Señal y barrera a escala fáciles de imprimir ideales para cualquier pista de construcción, escala 1/64 diseñadas para ad
Print two of these for a Hydrapeak 32oz container. Each one will hold 20 3ml vials. At the end of the day, this was designed to solve a number of issues: Printing without supports Better vial clearances with or without vial labels Deeper…
3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…
A lightweight travel bottle/vial for any liquids. The set includes 95ml, 50ml, and 25ml variants. The cap with the collar allows the bottle to be sealed and prevents leaks. Print instructions: The bottle itself is supposed to be printed…
In our bathroom we have installed the Villeroy & Boch ceramics series Viala . This includes a liquid soap dispenser. But this unfortunately got broken. Since some time Viala is not available anymore on the market. So I chose for an…
A simple gadget to make the air inlet hole in the plaster look nicer. The model is made parametric and made in Onshape. Its available here . I printed it with fuzzy skin and tree support. A whole forrest surrounded it during printing.
Important: Print horizontally or the columns will snap when inserting the vial! These are thin protective covers or cases designed for 5mL glass estradiol valerate injection vials manufactured by American Regent and Xiromed. They are…
Our lab uses gridfinity for organizing our research 3D-printers, and we finally made a base for 20ml vials that we use for storing resin, solvents, and samples. The base has holes for magnets that hold firm to the optics tables that the…
Generated with AI techniques This Poison Vial is a decorative container inspired by gothic alchemy and fantasy aesthetics. The bottle features intricate skeletal motifs, evoking the look of a forbidden elixir. There are two versions, one…
There is a version with horizontal cutout (blue) and one with vertical cutout (red) for the vial. The clamp can be optionally mounted on both versions. From an ergonomic point of view the horizontal version is better suited for individual…
This remixed articulated “flexi” octopus holds 16mm/5ml diameter sample vials full of fountain pen ink to stabilize them during use. The hole was made with negative volume in PrusaSlicer. The hole isn't wide enough for most vials with…
Relive the atmosphere of the iconic Resident Evil movie with a detailed model of a vial containing the T-virus! Perfect for collectors, fans of the franchise and fans of sci-fi entourage. The model is intended exclusively for interior…
holds 6 5ml 'vials'. The holes have a 17mm diameter. You can change the number of vials and the hole diameter in the VarSet of the Freecad project file.
Tutorial: https://www.youtube.com/shorts/Xo5y2RM67mk Glass bottles: https://amzn.to/41P7YkG Useful storage rack for keeping your long term cultures saved.
Designed to hold these glass bottles at the perfect angle to make an agar slant. Simply fill with 5ml of agar, loosen lids, place a few inside a jar and pressure cook for 10 minutes. Once pressure cooked let cool down to 120-130f then…
This vial plate holder can hold 6x8 vials suitable for HPLC, GCMS or similar. The vial cap plate is used to hold the vials in plate when automatically piercing the septum to prevent dragging the vial up when withdrawing the needle.…
The Vial Thermocouple Fastener (VTF) was developed to secure thermocouple inside cryovials for precise temperature monitoring. The VTF accommodates Corning® 2 mL Cryovials (Item # 431386) and Matrix™ 500 µL ScrewTop Tubes, but may also…
