Centrifuga da laboratorio a manovella attrezzi non necessari - Hand cranked lab centrifuge no tools needed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Centrifuga a manovella, nessun attrezzo necessario per assemblaggio - Lab hand cranked centrifuge no tools needed
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 41
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed altezza fino a 130 mm. Per l'assemblaggio seguire l'immagine allegata.
La centrifuga può essere bloccata su un tavolo o scrivania con un morsetto tramite l'impugnatura laterale sulla base. Fare attenzione alle parti in rotazione durante l'utilizzo.
Impostazioni di stampa
Infill 15% altezza strato 0.2 mm diametro ugello 0.4 mm
Disporre gli alberi di rotazione nel piatto sulla faccia piatta.
Grazie a Medici senza frontiere per l'impegno ed il lavoro!
Hand craked lab centrifuge, no tools required to assemble. No electrical current required to operate. Configurable for 2 or 4 test tubes. The test tubes lay at an angle of 45 degrees.
The test tubes allowed in the centrifuge have a maximum diameter of 30 mm and the height up to 130 mm. To assemble the centrifuge watch the atteched image. The centrifuge can be clamped on a desk from the side handle on the left. Pay attention to rotating parts during the use.
Print configurations
infill 15% layer height 0.2 mm nozzle diameter 0.4 mm
Lay the rotating axles with the flat face touching the print bed.
Thanks to Medicins sans Frontiere / Doctors without borders for the effort and the work done!