1 / 2
2 inch ,3 Inch and 2.5 inch and now hitch cover Decepticon — zdjęcie 1
1 / 2

2 inch ,3 Inch and 2.5 inch and now hitch cover Decepticon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 inch 3 inch and 2.5 inch hitch cover with Decepticon face plate

Ocena
0 / 5
Polubienia
28
Pobrania
235
Wydruki
0
Wyświetlenia
844
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Printed with .6 nozzle .18 layer height. Face plate has 2 layers thickness and hitch has 4. 

I placed a pause in the print so you can change color or filament type from face to hitch or print the other one with no pause. I printed face with EPAX PETG Space gray and the hitch with Black PETG Carbon fiber.

The hitch has 1/8 inch play on sided to slide in to receiver and pins that hold it in. If you want it to lock then break pins and you will be able to slide a locking pin through it. 

 

I added the 2 inch and 2.5 inch hitch, the 2 inch hitch is set to .4 mm nozzle FYI, and smooth plate so if you are going to print on a textured plate pay attention to the plate type.

Tagi