eMylo Wireless Remote Control Switch Board Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket is designed to hold the circuit board of an eMylo Wireless Remote Control Switch…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket is designed to hold the circuit board of an eMylo Wireless Remote Control Switch (https://www.amazon.com/gp/product/B07PTZ667M?ie=UTF8&psc=1&linkCode=sl1&tag=thpefi0f-20&linkId=06ebaccf370832012c666ef1933ed5ab&language=en_US&ref_=as_li_ss_tl) so you can decase the switch and mount the board in a project in such a way as to take up less space.
Designed originally to accommodate installing the relay board inside Quentin Machiels' Proton Pack (https://www.thingiverse.com/thing:4621554), which is easier to do if you take the case off the assembly itself to save space. This would work for anything you need, though.
The board slides in simply (it's basically just a rectangle, but keyed on one corner) and uses the wires to hold itself in. If the board is a tad too loose for your liking, a small dab of hot glue will keep it right in place.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: Generic PLA Black
Category: Electronics