IKEA Rallen Wireless Charging iPhone Xs / Xr / X / 8 / Samsung S9 Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this neat housing in which you can mount the IKEA Rallen.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this neat housing in which you can mount the IKEA Rallen.
Stand version - Standard size: https://www.thingiverse.com/thing:3068268
Stand version - XL size: https://www.thingiverse.com/thing:3141797
Tested with:
iPhone 8
iPhone X
iPhone 6 and 7 (with aftermarket add-on)
Samsung S8
Samsung S9
Works with any phone, with and without a case
How to use?
- Remove the outer plastic ring of the Rallen. This is not used. Keep the grey rubber ring on.
- Put the power cord trough the hole from the front
Place the Rallen in the hole, firmly press it in. It is a really tight fit, like perfect!
Demo video: https://youtu.be/fB1vqeGP\_dMAlso check out my full stand for IKEA Rallen: https://www.thingiverse.com/thing:3068268
Print instructions
Category: Mobile Phone Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
You can use a semiflex material (which I used in white), this gives it a nice touch and prevents the phone or housing to move around.