yet another universal ball joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball Joints that shall be compatible with a Gorilla Pod chain
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
yet another ball joint.
It started with my desire to reuse an old gorilla pod tripod. Their ball diameter is around 20.2mm.
The tolerances might depend on your printer. I had to give it some trial and error.
To make the design more robust (in terms of less dependent on your printers tolerances) I designed the “doublecup” that can connect two ballheads. The fit can be additionally tightened with a screw (hole diameter is 5 mm).
→ My recommendation: Print the ball and the double cup part.
Prints fine in PLA with 0.2mm layer height and no supports.
Consider printing in these orientations (with a brim for the double coup):
Remixes wellcome: Onshape or the provided step files.