1 / 7

Tippmann TMC to cyclone Magazine SIDE Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UntangleWORKS

@UntangleWORKS

this the updated version. no mods needed. but keep in mind you need a plug to close off the air supply form your…

Ocena: 0 / 5
Polubienia: 1
Pobrania: 30
Wydruki: 0
Wyświetlenia: 251
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Other Sports
Licencja: Creative Commons — Attribution

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)

this the updated version. no mods needed. but keep in mind you need a plug to close off the air supply form your cyclone feed. otherwise you will have a air leak.

and of course you still need a spring and 2 pins to complete the mag release

note: these have been tested on X7 classic and X7 phenom bodies.

link to the Installation video of the T15 and TMC magfed adapter

if you like to be the cover photo of this one. then you can send a picture of your marker with the adapter to me thanks.

Update___
23-05-2020 TMC MW MR V4 added there was a error in part V3. this error was not noticeable in cura. I mean I have printed them with out a problems like 7 times. but I'm now a better skilled in freecad so it was a easy fix

update 23 06 2020_____
new mag release button wide added.

itchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/

Print Settings

Supports:

Yes

Category: Sport & Outdoors

Tagi

adapter thingiverse paintball magfed tippmann tippmanntmc tippmanna5 tippmannx7phenom