1 / 5

MCS DMAG / HELIX to Tippmann 98 Magazine side

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UntangleWORKS

@UntangleWORKS

here is a side design. with some space left for in case you use a response trigger upgrade bitchute movie link:…

Ocena: 0 / 5
Polubienia: 2
Pobrania: 27
Wydruki: 0
Wyświetlenia: 334
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Other Sports
Licencja: Creative Commons — Attribution

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)

here is a side design. with some space left for in case you use a response trigger upgrade

bitchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/
https://www.youtube.com/watch?v=tkegaAAC0ws
link to the Installation video of the Dmag magfed adapter

Print Settings

Supports:

Yes

Infill:
40%
Post-Printing

it can be a smart thing to melt in a iron or copper wire in the part shown in the picture. or print that section with a higher infill. at first was I surprised that it looked that is was not needed. but I had a failure on my second print so. keep that weak spot in mind.

for use of the 2 pins, just use 2x m3 bolts with a length of 12mm.
and of course 1 spring and 2 pins are needed to make the mag catch work.

Category: Sport & Outdoors

Tagi

adapter thingiverse helix magfed tippmann mcs dmag

MCS DMAG / HELIX to Tippmann 98 Magazine side

Informacje o modelu

Print Settings

Infill: 40% Post-Printing

Tagi

Infill:
40%
Post-Printing