HBX 2997a Battery Tray - TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just what every 2997a owner needs.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I present my HBX 2997a TPU battery tray. You will need to relocate your ESC (usually what we all do first anyways). If you have moved it and want a more stable platform on top of your steering servo or have not moved it yet and want the best relocation/mounting solution, check out my ESC relocator plate HERE . This battery tray can be printed out of PLA but it will make the vertical sides more susceptible to breaking.
Ensure you clean the inside of the chassis location with ISO or something similar before using double sided tape to hold the tray down.
Tray dimensions are:
120mm long
32mm wide
30mm tall
I use a 1x20inch velcro strap. Easy find on Amazon. Amazon also sells create your own velcro strap kits.
This was printed at standard .20 quality, 15% infill, with 5 rows of outer brim.