1 / 8
ZF-500 Flathead earbud shell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
A rough copy of the MX-500 shell.
Recommended to use a 0.2mm nozzle, but you should be OK with a 0.4mm. The default orientation is to print the shells on their backs as this minimises the need for supports, but printing them the other way up will give a nicer finish as long as you use a brim to counter any adhesion issues.
Prints tested with PLA and 0.4mm nozzle on a P1S.
Changelog:
30/05/2024
Added a version with a bass port.
28/03/2025
Refined existing models.
Added versions with integrated rivet mod and very large bass tube.