ZF-500 Flathead earbud shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rough copy of the ubiquitous MX-500 earbud shell, with versions that integrate popular mods.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 86
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
A rough copy of the MX-500 shell.
Recommended to use a 0.2mm nozzle, but you should be OK with a 0.4mm. The default orientation is to print the shells on their backs as this minimises the need for supports, but printing them the other way up will give a nicer finish as long as you use a brim to counter any adhesion issues.
Prints tested with PLA and 0.4mm nozzle on a P1S.
Changelog:
30/05/2024
Added a version with a bass port.
28/03/2025
Refined existing models.
Added versions with integrated rivet mod and very large bass tube.