Starter Motor Pawl for 25-40hp Yamaha Boat Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pawl drive for starter motor on Yamaha 2-stroke boat engines (25-40hp). This is a rough approximation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
Pawl drive for starter motor on Yamaha 2-stroke boat engines (25-40hp). This is a rough approximation of the original piece made in a rush during a major flood in Brazil.
The model after printing will need to be sanded down to appropriate size to properly fit the starter motor on your boat - keep an electric sander ready. One of the holes also doesn't go all the way through, so also keep a drill on hand.
There are two models included, one with 51mm in length and another with 56.3mm in length. I suggest you print both and check which one fits best. In case the main screw hole is too tight, adjust the x-y hole compensation setting in your slicer.
Printing Instructions
- PLA works good enough
- 100% infill
- Slow down the speeds and lower your temps for a stronger print
