Starter Motor Pawl for 25-40hp Yamaha Boat Engine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pawl drive for starter motor on Yamaha 2-stroke boat engines (25-40hp). This is a rough approximation.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 1
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Pawl drive for starter motor on Yamaha 2-stroke boat engines (25-40hp). This is a rough approximation of the original piece made in a rush during a major flood in Brazil.
The model after printing will need to be sanded down to appropriate size to properly fit the starter motor on your boat - keep an electric sander ready. One of the holes also doesn't go all the way through, so also keep a drill on hand.
There are two models included, one with 51mm in length and another with 56.3mm in length. I suggest you print both and check which one fits best. In case the main screw hole is too tight, adjust the x-y hole compensation setting in your slicer.
Printing Instructions
- PLA works good enough
- 100% infill
- Slow down the speeds and lower your temps for a stronger print
