1 / 3
Double Tires for N20 Motors (or anything with a 3mm D-Shaft)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basically a copy of those generic 34mm x 7mm wheels you can find all over the place, but with double tires.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
A copy of the ever present 34mm x 7mm wheels you can find all over amazon, ebay, aliexpress, etc. but with double the tires ;)
The rubber tires themselfs are from those 34mm x 7mm wheels.
Should fit the 3mm D-shaft of any N10/N20/N30 motor.
I included the step file, if someone needs to adjust the D-shaft tolerances or something.
Print settings:
- high number of perimeters
- 100% infill
- organic supports, to get some clean overhangs. Probably works good with regular supports too.
- Almost no post processing needed, remove the support and use a reemer or knife for the shaft hole edges for easier insertion of the D-shaft