1 / 3
Double Tires for N20 Motors (or anything with a 3mm D-Shaft)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basically a copy of those generic 34mm x 7mm wheels you can find all over the place, but with double tires.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 125
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
A copy of the ever present 34mm x 7mm wheels you can find all over amazon, ebay, aliexpress, etc. but with double the tires ;)
The rubber tires themselfs are from those 34mm x 7mm wheels.
Should fit the 3mm D-shaft of any N10/N20/N30 motor.
I included the step file, if someone needs to adjust the D-shaft tolerances or something.
Print settings:
- high number of perimeters
- 100% infill
- organic supports, to get some clean overhangs. Probably works good with regular supports too.
- Almost no post processing needed, remove the support and use a reemer or knife for the shaft hole edges for easier insertion of the D-shaft