Counting matching models…
A quick remix to enlarge the hole in the top of the grip. This allows for the wired variant's USB cable to easily slip through without needing to file the edge down. Also compatible with standard generic USB SNES style controllers I…
material: nut, hose attachment -ASA, seal -Flex wall layers: 3 infill: 30%
-PT-BR Esse mod tem como objetivo trazer o Afterburner para a Bluer. O Afterburner "stock" é ideal para ABS porém deixa a desejar com PLA. Como a Bluer é muito usada para imprimir PLA, uma opção melhor seria utilizar um MOD chamado AB-BN…
My first completely original model! This is an Ikea Skadis mount for the Nintendo Switch Online Super Nintendo (SNES) or Super Famicom (SFC) bluetooth wireless controller. It will also work with the 8bitdo SN30 or SF30 bluetooth/2.4ghz…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Print with the top of the lid face down, and the bottom of the base face down. This is the first draft and just happened to work with my settings (.16mm, PLA, Build plate supports only) so if you have issues and know a better way to…
A display stand for the 8BitDo SN30 or Nintendo Switch Online SNES controller. Includes dongle slots for SNES and USB. Also compatible with original SNES wired controllers. Purchase: Also available at kytor.com/store Recommended…
This remix from pixelauthor's SN30Pro+ Trigger plate. pixelauthor's version has a profile that allows the same trigger plate to be instaled on both left and right R2 button. However the one downside is the trigger plate profile does not…
Sort like the Sierra RR cars, but even smaller! The 3D long couplers are for ultra sharp curves, you can use regular 1015 couplers if you like. Category: Hobby
Cover snaps over a Kato N scale 11-109 tram chassis to allow for HOn30 or On18 critters to be built.
Compatible with 8bitdo SN30pro and Pro2. Possibly compatible with other 8bitdo controllers
The grip clips on to the SN30 pro. The clips and the grip part are printed separately and have to be glued together
A HOn30 bridge based on the Buchanon bridge along the Waynesburg & Washington
This is a HOn30 18' boxcar that might or might not look like the Bachperson On30 model. I used Tichy grab irons, stirrups, and brake wheel. 1015 Microtrains couplers and Microtrains axle length (.540") 36" metal wheels form Eastern…
This is a shorty Climax locomotive I made to fit on a Kato 4 wheel chassis. Category: Toys & Games
What do you do when you need wheels, but ordering them will take too long? you print 'em yourself - I had a look around, and the ones I could find had too large d-holes, so I decided to make my own. Print the actual wheel in some stiff…
original model https://www.thingiverse.com/thing:3402989
This is a HOn30 Davenport made to fit a Toma Model Works #6191 power chassis with 7mm wheels and 14mm wheelbase. If you're not up for the challenge of adding he crank rods you can use the "plan B" frame, it has journals like Davenport…
These are the parts I used to make my own freelanced railbus based on the Casey Jones of the Silverton & Northern. https://www.youtube.com/watch?v=1iZ76y9BxHk Category: Hobby
The real locomotive was hand made and still runs. I used video stills to make the drawings. I used a Bachmann N scale 70 tonner with the circuit board removed. A 44 tonner would work as well. Category: Hobby
HOn30 version of a Cincinnati Locomotive built by the Cincinnati Car Corp. This 3d model was made from photos and not scale drawings. To me it is a little bit big for HO scale. You can resize.
This is a HOn30 version of the 3' gauge Hoosac Tunnel and Wilmington railroad. I use Microtrains 1015 couplers and MDC N scale passenger trucks with 36" metal wheels. Category: Hobby
I made this cover to protect the analog sticks on the SN30Pro 'cause I bring it with me everywhere in my bag and when I put something in I'm afraid of breaking them. The cover clips to the little holes in the controller for the original…
This is a HOn30 5 ton BFA Brookville gas locomotive. It is designed to use a Toma Model Works power chassis #6151 with a 12mm wheelbase and 6mm wheels. This is the chassis used:…
I got sick of my CPAP mask sliding up off my head every night because the headgear doesn't actually hold onto anything at the back of the head. This adjusts the angle downward so that the headgear can cradle the base of the skull and is…
HOn30 logcar. Uses 1015 couplers or print the one with dummy couplers. For trucks use the ones in my 18' Boxcar model. Wheels are Eastern Seaboard Models 36" metal wheels with .540" axles. But any Micro Trains length (.540") axles should…
I couldnt find any good wheels for my 150g combat robot that fit my chassis, had enough traction, and stayed on the hub well. So I made one. There are 2 models one for 2 O rings and 1 for 3, size 211 works best 212 can work (from harbor…
This is a HOn30 Mattole Lumber Co. Vulcan Iron Works 0-4-2. Made to fit a Aru Models 0-4-0 chassis with rear wheel added. Print body tipped up at 23 degrees and after printing remove rear tab. Category: Hobby
HOn30 Ewa Plantation boxcar. Uses Micro Trains length axles. .015" wire for the truss rods. .0125" wire for the grab irons. Use either 1015 couplers or link-pin couplers. Category: Hobby
Needed a way to play PSP and DS games on a plane, so I made one. Printing Details: The uploaded files are in the correct orientation. Add supports as you see fit I am testing with 100% infill PLA, will update this rec if I have issues…
This is a HOn30 Climax I made using parts from a Life-Like SW600. Just offering it up in case any parts of it can be used. Category: Hobby
This is a HOn30 motor car for the Eureka-Nevada Railway. It used a newer Kato 11-109 or 11-110 power chassis with the plastic shell stripped off. Updated with more detail. Category: Hobby
Narrow a D&SP waycar for HOn30 and made a short version. I used .015" wire along the bottom of the frame. And I used Kato diesel wheels. Category: Hobby
This is made to take 36" N scale wheels with .540" axles. (Microtrains length) I used HO scale 2x6's for the decking and Microtrains 1015 couplers. The first Rio Grande flat cars were 90 small 4-wheel cars with a capacity of 5 tons, built…
Jackson and Sharp type trucks for HOn30 passenger equipment. They use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. Category: Hobby
I recently bought another one of these controllers since the hall effect stick update and am obsessed with the SNES controller form factor. I even swapped in the purple buttons for extra nostalgia. To protect it during travel/in a bag, I…
This is a remix of "SN30 Pro/Pro+ clip" by Urpoopheadhaha, combined with "Nintendo Switch Pro Controller Mount" by BuilderBob ================================================== We finally worn out our pro controller.. it drifts quite a…
The Kennebec Central has 8 coal cars. 3 of them were made from flatcars. 5 of them were longer. These are old files. I use two 1/16" dia tungsten welding rods under the cars to keep them straight. Category: Hobby
HOn30 Dolly Varden Hopper. Plus bonus shorty.
This is a HOn30 Bellevue and Cascade stockcar. Frame uses Microtrains 1015 couplers. Trucks use any Microtrains axle length (.540") 36" wheels. Category: Hobby
I recommend printing in PETG for best strength. Layer height 0.12 - 0.16 mm. I recommend printing with a lot of infill, to improve the strength, infill: 50 - 70 %
NEW lime rock dump car in HOn30. I updated the journals and springs. Also added brake beams and more bolt detail. Included is a supported model. I used 1015 couplers and 36" N scale Eastern Seaboard Models metal wheels. But any…
This is a remix of Kytor's SNES controller stand. I wanted a version that didn't have the dongle slots at the back, so made it myself. Other than the removal of the dongle slots, some material has been added at the back of the stand for…
These are tippers used by the Lime Rock Railroad made in HOn30. They use MicroTrains length axle wheels and a .020" piece of wire between the journals. Category: Hobby
HOn30 Jackson and Sharp type trucks. Use 36" .540" axle wheels. Category: Hobby
These cars were used on the Iron Mountain RR in Pardee MT. Modeled in HOn30. Any MicroTrains length (.540") axle wheels will work. 36" wheels in N scale are the correct size, but 33" will fit. Category: Toys & Games
Model of the Nord N300 cell phone. Useful for building your own case if you own the real thing.
Stand for the LATEST SN30 pro (2020version) with the thumbsticks. MMU version Print instructions Load all files into prusa slicer, pick your extruders and you're good to go! As per usual, F360 and STEP files included for remixing.
Same railbus I have up on Shapeways. Will take either a Kato 4 wheel chassis or the Kato 8 wheel chassis. Category: Models
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
I use 1016 couplers and 2 1/16" tungsten welding rods glued to the underside. Category: Hobby
I printed in PLA with ‘gyroid’ infill at 15% which is definitely strong enough for my use - though ‘grid’ or similar would probably be a better choice considering the direction it's likely to have pressure. A also added 100% modifiers at…
I disliked the tie spacing of the Peco Hon30 "rough" SL-400 track so I made some tie strips to use as a filler. When you decrease the tie spacing then you need to fill the gap with more ties. That's what this 3d file is for.
HOn30 Maine truck. Uses .540" axle wheels. I use Eastern Seaboard Models 9209 N scale 36" metal wheels. Category: Hobby
These trucks use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. This is an old file. Category: Hobby
I changed the SemiTruck from N20 to N30 motors. They are slightly longer, but far more powerful at same rpm. I use 6v 400rpm and 500rpm. https://s.click.aliexpress.com/e/_c3oyUdPz Comparing the data sheets with ChatGPT, they should have…
This is a HOn30 model that I scaled up to O scale Category: Toys & Games
hice esta helice para explicar el principio de la energía eólica, espero les sirva, calza en los motores mas pequeños los que se utilizan en experimentos de colegio
New Rockland Slate in Canada had a small 30" gauge railroad. 0.540" wide axles and 1015 couplers. Couplers snap in.
Purchased SN30 Pro for travel and liked sternendrache2 's thoughtful approach for a light weight grip. I wasn't sure why glue would need to be involved so I tried putting the parts together and printing and it worked out well. I did print…
Someone asked for me to upload these. I was able to use code 55 rail in them. Category: Hobby
HOn30 Steam Dummy *based* on Baldwin #12807 Std 5½&8x13 33” 0-4-0 Coke 7/1892 4 5/10-C North Chicago Street Ry #12 Motor Returned as “too small” ~ Resold Mohnsville & Adamstown #1 Print roof upside down and sand it smooth. "block" file…
CWWK/Topton Affordable Edition Riser Base to accommodate 80x25mm fan at the bottom Combine with ZeroFlow's 120mm Top Fan mount for significant cooling benefits. Results: Stock fanless 48C 120mm Fan only 30C 120mm Fan and 80mm Fan 24C…
To match my boxcar. Use trucks and underframe from the boxcar. Category: Hobby
Simple to print - you'll need to set the bottom flat on the bed but prints really easy once you do.
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Gray or Black Printing: 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls No brim or supports necessary Variants: -00 Single Controller Stand Revision…
Can be printed on the side or upright. Supports required for the hooks.
Printed on Ender 3V2 using PLA Plus Rotated on the side and Supports used
Replacement buttons for the 8BitDo SN30 Pro controller. These buttons have a more pronounced fillet to allow for easy sliding from button to button.
Here is my version of the ALCO Boxcab designed for HOn30. This was designed loosely based on several prototype photos and uses a readily available chassis. This model was designed to be printed on an FDM printer with a standard 0.4 mm…
8BitDo SN30pro+ Wall mount
20230709 EDIT: I have been using the same design without issue for 3000 more kilometres now. no structure change for new design, but I have add my YouTube channel name on the inner side of this version. 20230327 EDIT: After 1000km of…
Mount your Amazon Fire HD 8 (10th gen) tablet to your 8BitDo Pro+ controller with GoPro styles connections. The tablet fits snug. Needs 2 M5 screws to connect the parts, which allow you to change the angle of each connection
Do you have Honeycomb Wall Storage by your gaming consoles and want to have your controllers on it? This will help. I printed on its back with the insert at the lowest part. Used tree supports but Normals would also work.
Here is a simple (and hopefully somewhat beginner friendly) Hon30 Class A Vertical Boiler Climax. This was designed loosely based on several prototype photos with inspiration drawn from the NWSL and Mark Rollins kits that were offered a…
Simply mount air nozzle on focusing lens. This should also fit on other Neje laser modules like A30130 External diameter of air input is 5mm. Nozzle mounted on laser: https://www.youtube.com/watch?v=fPiL8KUA4E4 Category: DIY
These are for a Fyling Zoo HOn30 18 ton Climax. Category: Hobby
I needed a way to mount my phone onto a tripod. I had the 8Bitdo SN30 Pro+ Smartphone Clip, which separates into two parts. The smartphone holder clip, and the part that snaps onto the controller. I designed an adapter that can receive…
My SF30 Pro thumbstick wore out so i decided to draw up a new one. There are two versions: flat and concave. To make up for the material not having much grip i included a bumpy texture to the stick. I find the concave version works…
Simple SN30 Pro charging stand made for the following magnetic USB-C cable (but I guess it should be compatible with some other brands as well) : https://www.amazon.fr/gp/product/B09CD3LHJZ/ The assembly should be a tight fit, but if it…
Here are a few freelanced 4-wheeled cars to round out your rolling stock. These models utilize my wood side dump car chassis and were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height. These…
I made this truck years ago to try out my new DLP resin printer. The side frames and brakes are installed on a central frame. This truck is designed to work with San Juan Car Company On30 metal wheelsets (SKU 5110) and the brakes are a…
Same as the other file, just as a single. Category: Hobby
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
Wanted a charging dock for my sn30 pro's, of which I have two for playing my docked Odin 2, so designed this modular dock for either 1, 2, 3, or 4 sn30 pro's to be charged / stored at once. For a single-bay dock, print the first bay, the…
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
Here is my take on the ubiquitous H.K. Porter 0-4-0. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and all parts are designed to be printed with no support. Also, this model is designed for use on…
A mount for the 8BitDo SN30 SNES controller that mounts on the popular Honeycomb Storage Wall. Requires blank inserts to mount. The pegs are spaced 2 holes horizontally (3 if you count the offset ones in the middle). I printed with PLA at…
Just pop off the bottom plate and put this on. Category: Hobby
The goal for this project was to create an ON30 truck, and make it as 3d printed as possible. The result I think is quite good. I printed everything in Petg. The couplers sit in the coupler pocket on the truck frame, then the coupler…
Needed a model for my project however there were not any online so i quickly sketched one up not the most detailed but should be sufficient in 90% of use cases it should be accurate but im not 100% sure since the online dimensions were a…
A simple 3D model that allows you to hide the Di2 BT-DN300 battery inside the seatpost. The model is designed for the seatpost compatible with the Hygge Model S frame. All you need is an M6x40mm (or longer) bolt and nut . The torque I use…
Here is a simple model of a narrow gauge skeleton log car. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and 1015 couplers. Tips for…
What is it? An adapter to allow the use of magnetic four-point headgear like from the ResMed F20, F30i, etc. on the Airfit P30i / N30i frame. Why? The back of my head is not well-shaped to retain the normal headgear for the ResMed…
Here is my take on Overton style passenger cars. These models were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and/or 1015 couplers. There are now…
Updated: Recreated in OpenSCAD
Using N scale TTrak standards you can NOW make an Hon30 module with these 3d printed track connectors. They use Kato unijoiners and the Hon30 track tie strips (I've created available here ) and you supply the code 55 rail to have an Hon30…
Here is my version of the universal small narrow-gauge diesel often known as a “critter”. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and all parts are designed to be…
This model is a replacement part for the 8BitDo SN30Pro controller. Some structures were reinforced and the hole for fitting the axis was slightly enlarged for better compatibility in relation to the original part and other replica models…
