Ultimate Nozzle Wiper Prusa XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed/inspired by the Ultimate Bambu Nozzle Wiper and the Debris Buckets for the Prusa XL
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 212
- Wydruki
- 5
- Wyświetlenia
- 3004
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the idea from @Surfalex2000 with the debris-buckets and the nozzle-brushes but wasn't that confident while using brass brushes to wipe the brass nozzles on my Prusa XL.
Then I saw the Ultimate Nozzle Wiper and wanted to adapt it to my XL while still beeing able to use the debris buckets.
My tube-holders are basically a drop-in replacement for the brush-holders and can be mounted the same, with the help of this brush positioner.
I used this fully printable T-nut with M4x8 screws to secure the tuber-holders in place.
To cut the silicon tubes you can use the Silicon Tube Cutter from @danielschweinert.