Livboj Gridfinity Phone Charging Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a good model that combined Gridfinity and Ikea Livboj for a phone in landscape mode so I made my own.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity and Livboj in landcape mode. 2x4 base and two models. One with a 45° angle for my desk and one 70° angle for my nightstand.
Layer height at 0,28 mm with 15% infill and good bed adhesion for the gridfinity base. I had a filament change between 17-20 mm for the colored line and a flower of life coaster, scaled to 20%, attached with some double sided tape. Polyterra PLA Carbon Black and PrimaSelect PLA Glossy Antique Copper was used.
USB-C cable can be attached from left or right, I used tweezers to push the cable into the charger.
Modeled after Samsung Galaxy S22 Plus with a case, 166x84x14mm. Hmu if you want other dimensions :)