Livboj Gridfinity Phone Charging Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couldn't find a good model that combined Gridfinity and Ikea Livboj for a phone in landscape mode so I made my own.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity and Livboj in landcape mode. 2x4 base and two models. One with a 45° angle for my desk and one 70° angle for my nightstand.
Layer height at 0,28 mm with 15% infill and good bed adhesion for the gridfinity base. I had a filament change between 17-20 mm for the colored line and a flower of life coaster, scaled to 20%, attached with some double sided tape. Polyterra PLA Carbon Black and PrimaSelect PLA Glossy Antique Copper was used.
USB-C cable can be attached from left or right, I used tweezers to push the cable into the charger.
Modeled after Samsung Galaxy S22 Plus with a case, 166x84x14mm. Hmu if you want other dimensions :)