1 / 2
General Lee - Dukes of Hazzard - Lego compatible
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lego compatible rim
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Imported from my designs on Thingiverse. Original upload was 13.10.2019 (dd.mm.yyyy)
This was requested by Preston1948
Took about an hour to model the rim in Fusion 360.
I used a lot of support when printing it face up. Im sure it can be printed face down as well.
0.2, 30% cubic infill, 5+ walls