Arrow Quiver with optional top tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arrow tube quiver stand.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Arrow tube quiver stand.
I designed this for a friend who due to disability's, sits down to shoot. They wanted a tray as while they shot they remove their glasses.
original design had hex holes at ends of tube and base. i planned to create a plug/lock to hold everything together. I realised this was not necessary as the interference fit was enough and it compromised strength.
Three different shape trays to choose from
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
Rafts:
No
Supports:
Yes (only needed for top tray)
Resolution:
0.2
Infill:
15%
Filament: any PLA/PETG any
Notes:
Print two of tubes. tubes are tapered to snug fit. assemble with narrow end of tube at bottom. this stops arrows catching when inserting.
Walls set to minimum of 1.6mm for base and tubes, no supports.
trays will need supports for center hole.
Post-Printing
be care full not to force parts together. a gentle fit will do.
How I Designed This
Designed using Tinkercad
Category: Hobby