Apron/Skirt card holders for Pinball machines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame your instruction cards, cover up insider connected, etc.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
You can class up your machine a bit by putting the instruction card in a frame, so it's not bent and stuck in the slots.
The “Standard” file, which you can see used on Foo Fighters, frames a standard (Stern) instruction card.
The “XL” file is larger for custom instruction cards. Shown on my TMNT
The “triangle” is designed to completely cover the cut out on a spike 2 premium. You can use this to cover up insider connected. This is shown on my Iron Maiden, which also utilizes the standard and a smaller middle one.
For the smaller middle one or to customize the size, simply scale it in your slicer to desired dimensions.
I used double sided tape to both mount the holders and the cards.
