Liczymy pasujące modele…
Simple, clean, modern hook. Designed to simply snap snug on to a US standard 1" drywall screw. I simply install the screws into the hook align and press into drywall to mark, screw the screws in and re-hang the hook. Print instructions…
Instead of tying the apron string behind your back, attach each string to this buckle instead. Designed for the HomeDepot associates apron, but likely works with many others. PETG suggested for strength and durability, no supports.…
The corners are printed thin to allow for bending into the apron.
You can class up your machine a bit by putting the instruction card in a frame, so it's not bent and stuck in the slots. The “Standard” file, which you can see used on Foo Fighters, frames a standard (Stern) instruction card. The “XL”…
This is a hanger I designed for my Savage Industries Apron in addition to my respirator and safety goggles. It is modeled to be printed easily without supports and uses drywall screws to mount it to the wall. I printed mine in PolyTerra…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Remixed BuildX's Spinning Tool Caddy to add another row in front that's very low to accommodate at 45° filament cutter as well as a few pockets on each side for misc. small things like driver bits. Only the main caddy body is included…
I ordered a convenience kit from SealedLab that includes a PCB stick for the Apron LEDs and I was sad to see no appropriate holder for it so I made one. This model is supposed to be printed standing, and since it is a very thin piece I…
LED strip apron mount for Labyrinth Pinball This LED strip mount attaches to the apron to better illuminate the area near the flippers and reduce the “X” pattern cast by the stock apron lights. Printing: Material: PETG Layer Height: .2mm…
My wife loves to bake so I made her this for her aprons and as a baking closet door knob.
an apron for your LEGO sized mini figs.
Print with no supports, supports are integrated. Use translucent filament for the lens.
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
A simple knob to hang something in, like an apron. a 2 part print: Inner screw to mount to the wall (orange) Outer knob to screw into the inner screw and look pretty Print instructions the inner screw needs no supports to print. it has a…
Small clip designed to hold the Festool extractor bluetooth remote in an apron chest pocket. It uses and M3x40mm screw with heat set insert to proved additional strength ad the clips broke easily without it. I also used a small piece of…
Stern Insider Apron Mount that would come with a Premium Stern Insider Connected kit. Hardware needed: (2) 2mm nut inserts (2) 2 8*mm screws w/washers Recommended settings: .15-.2mm layer height with 100% infill with textured sheet. Edit:…
This model allows you to print the covers and lenses separately before your ECRF is assembled. Thanks to that you can print them from ABS and clear PETG which would've been a hassle when printing the multimaterial version. Just use a bit…
After purchasing the design for the shop apron on AdamSavage.com I wanted to make it easier to cut out the leather components. These are stencils for the pockets and harness pieces.
velcro apron tie is adjustable and does away with the need for tying the straps. Just feed the straps through the holes and add vecro. Leave the straps long for pulling them to tighten apron. They could also be used for other items with…
I bought a cheap apron of Amazon to protect my clothes during glue ups. After having trouble making knot behind my back, I decided a couple 12mmx6mm magnets and my printer could help out. The parts are printed from PETG, and th magnets…
I designed this specifically for Labyrinth, but I assume it works for other machines. VHB the mount to the underside of the apron, and mount the led strip to it. the mount is 6mm thick. I used a 5mm wide led strip. This clears the trough…
UPDATE 2026 03 12: Information about Filament to use 2025 10 18: Add je clip for 8 gates. Must be fixed with 3 T-NUTS and M3 FHC screws DESCRIPTION It is a remix of the Apron Led for your ERCF. This model is only in one part : easier and…
Requires a very good first layer calibration.
Simple utility closet wall hook to hold aprons, mops, etc. I printed this in PETG and it has been holding 5-10lbs with no issue for months. (I also printed a version in NylonX in case the PETG wasn't strong enough, but I haven't needed to…
You really have to have your first layer calibration correct for these to print nicely.
For holding a small square. Use magnets in holes.
This is a hook for my Buhres apron so I did not have to drill or screw in the kitchen cabinet. It slides over the top of the side 19,3 mm panel of my high kitchen cabinet.
Intro I needed a hook for my beard shaving apron, because the last one broke so I designed it in Fusion360. Print settings Printed this on SV06 with 0.4mm nozzle Material : PETG Layer height : 0.2mm Infill : 100% Build plate adhesion :…
Used to replace gasket at bottom of apron on round dial monarch 10ee. This Youtube Short explains how to cut material on cricut.
A simple hook to hang up your apron. Will fit any standard closet rod under 2". No supports needed and prints fast.
Super simple hook for hanging up aprons or anything else in the kitchen. Easily utilize a Command Strip within the 20x40mm back surface. Include a filament change in your print to make the dough roller graphic appear. Also included is a…
I needed something to hang an apron in our pantry closet and couldn't find a model that worked for this style of wire basket. This is tight enough to grab the horizontal bar so it doesn't come off when you take off the apron and the block…
Shop apron holder. Need to continue my journey to organize my wood working shop. Printed with black PETG. No supports. See attached printing instructions.
I built my FYSETC ERCFv2 kit and used their print files, but when checking the coupler blocks for the ERCT was marked as opaque [o], so following the Voron naming I printed them in black. But then I found out that the coupler blocks are…
Modeled this part as it's not been available for purchase for a while. Best printed in nylon (The original is PA6-GF30. I used Polymaker PA6-GF Grey). I printed with the front part face down (as oriented in upload) and it was a pretty…
New meteo cover bottom, so it can be glued to the apron. The base has 3° tilt to compensate average apron incline. The gap for wires is created in to variant: east-facing and west facing windows, so it leads toward the corner (as you can…
Printing a lasagne film developing "apron" Most people develop their film in small tanks that have spiral reels for holding the film in place so the chemicals can reach the entire surface. However, Kodak and others used to make a…
Accessoire pour maintenir le tablier de la baignoire. Impression sans supports. Imprimé en PETG / Buse 0.4 mm / Hauteur de couche 0.3 mm. ***************** Accessory for holding the bathtub apron in place. No supports. Printed in PETG /…
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
I built my FYSETC ERCFv2 kit and used their print files, but when checking the coupler blocks for the ERCT was marked as opaque [o], so following the Voron naming I printed them in black. But then I found out that the coupler blocks are…
New meteo cover bottom, so it can be glued to the apron. The base has 3° tilt to compensate average apron incline. The gap for wires is created in to variant: east-facing and west facing windows, so it leads toward the corner (as you can…
