Autobot hitch cover 2, 2.5 inch, or 3 inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Autobot hitch cover 2 inch, 2.5 inch, or 3 inch
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used PETG, the profile is listed for texture plate, but if you want the hologram on it then you will need a smooth plate and a smooth plate profile used. I printed a 20 percent infill for face and 40 percent for hitch for the added strength, 3 wall on face and 4 on hitch or the pins will break.
Do not use PLA unless you take the risk of it melting or pins breaking, you may be able to use PLA plus but I have not tried it.
You can change the colors in Bamabu studio or any of the Prusa studio types. I know that the autobots colors are backwards blue to red where I have red to blue, I liked it this way.
I thought about trying red whit blue in transparent giving a neat effect with the black backing, I might do it later.