Autobot hitch cover 2, 2.5 inch, or 3 inch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Autobot hitch cover 2 inch, 2.5 inch, or 3 inch
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 74
- Makes
- 1
- Views
- 356
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used PETG, the profile is listed for texture plate, but if you want the hologram on it then you will need a smooth plate and a smooth plate profile used. I printed a 20 percent infill for face and 40 percent for hitch for the added strength, 3 wall on face and 4 on hitch or the pins will break.
Do not use PLA unless you take the risk of it melting or pins breaking, you may be able to use PLA plus but I have not tried it.
You can change the colors in Bamabu studio or any of the Prusa studio types. I know that the autobots colors are backwards blue to red where I have red to blue, I liked it this way.
I thought about trying red whit blue in transparent giving a neat effect with the black backing, I might do it later.