1 / 1
Irwin 4 inch vice jaw cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Irwin 4 inch vice jaw cover
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This vice jaw cover is made for an Irwin 4 inch bench vice. You will need to print two of them for your vice. They use three 8-3mm magnets that will press fit by hand. I used the magnets listed below.