1 / 1
Irwin 4 inch vice jaw cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Irwin 4 inch vice jaw cover
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This vice jaw cover is made for an Irwin 4 inch bench vice. You will need to print two of them for your vice. They use three 8-3mm magnets that will press fit by hand. I used the magnets listed below.