Test Tube Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A laboratory rack for 6 or 8 test tubes that uses a hack in PrusaSlicer to get a cool hexagonal pattern.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 728
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
For the Contest: Lab accessories for MSF.
This is a test tube rack that can hold 6 or 8 test tubes.
Print 2 off End Supports
This print uses a nifty slicer hack in PrusaSlicer to get the cool hexagonal pattern using infill material settings. The type of filament is not important, I used PETG.
Print Settings for file: “TT Stand Side.3mf”
Keep the 2 bodies in the same positions relative to each other.
Body 1 - Flat Back:
- top: 0 layers
- bottom: 0 layers
- walls: 7 layers
- Infill: 10% Honeycomb
Body 2 - Rail Support:
- Infill: 100%
When you slice this file, PrusaSlicer will give you a GCode warning that the paths conflict. Don't worry, it prints just fine as the photos show.
2 Rails - Top & Bottom
There are 2 options, the 6 Test Tube support prints on regular size desktop printers, the 8 Test Tube support prints on XL printers. The 2 beams can be 3D printed with generic settings 20% infill, no support, any filament is fine.
I made mine from Sapele wood and treated them with Danish oil.