Clicking Ratchet Fidget Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps to use the fidget ratchet without wearing it as a ring
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These caps allow you to better hold the inner ring to spin the ratchet without having to wear it.
Designed in the model are arrows that tell you in which directon the ratchet spins (make sure to install it correctly). Make sure to print both files as is not just a mirrored version.
A bit of pressure is needed to ensure that the mechanism doesnt just spin as it has nothing to grip onto the original model besides friction, this can be fixed by using a bit of superglue if you dont plan to use it as a ring.
To do a multi-color print with one nozzle, you can do so by adding a “stop at height” g-code modification to stop the print after the 2nd layer finishes, and do a color swap then, this greatly helps with the visibility of the arrows.