LED Rail Clip for HICTOP Prusa I3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a lot easier to see how your printer is performing if you have a good light on the platform.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
It's a lot easier to see how your printer is performing if you have a good light on the platform. I designed these clips to hold a 12v white LED strip by twist-locking into the rail of the printer.
Because the power supply is 24v, you will need a step-down DC-DC converter to power the LED strip. You can buy a small LM2596-based board for a few buck on Amazon or EBay and print a small box for it to live in (there are lots of models of boxes to choose from on here.)
Print instructions
This part was designed in Sketchup