1 / 3
LED Rail Clip for HICTOP Prusa I3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a lot easier to see how your printer is performing if you have a good light on the platform.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 1
- Views
- 481
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
It's a lot easier to see how your printer is performing if you have a good light on the platform. I designed these clips to hold a 12v white LED strip by twist-locking into the rail of the printer.
Because the power supply is 24v, you will need a step-down DC-DC converter to power the LED strip. You can buy a small LM2596-based board for a few buck on Amazon or EBay and print a small box for it to live in (there are lots of models of boxes to choose from on here.)
Print instructions
This part was designed in Sketchup