Prusa MK3S+ Nozzle Camera Mount for 8mm Squared Camera Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support to mount a 8mm square camera module (eg IMX258) on the Prusa MK3S nozzle. 2 distances and step files available.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a support to mount a 8mm square camera module, such as the IMX258, popular on AliExpress, on the nozzle of the Prusa MK3S+.
Choose between the "Closer" or "Farther" version, depending on the distance you prefer to keep from the nozzle. Personally, with camera modules with a viewing angle of 75 degrees, I use the "Closer" version.
You will need an M3x6 screw to attach the mount to the hotend's cooling fan.
Please note that to mount the IMX258 module motherboard on the extruder, in addition to this model, you will also need to print the Prusa MK3S+ IMX258 Motherboard Support.
Recommended print settings:
- I recommend using ASA or PETG, to prevent the heat of the plate from damaging the support during use.
- Use one of the precompiled gcodes or the “0.2mm QUALITY” profile on PrusaSlicer.
- I recommend 100% infill to reduce vibration on the camera module during use.
- You may need to use supports around the screw hole.