150mm (6") screwdriver bit holder box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box to hold 32 standard 1/4 inch 150mm screwdriver bits with snap on lid and lanyard hole.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
150mm screwdriver bit holder box
Bit holder box that is designed to hold 32 of 150mm long screwdriver bits.
Lid closes with two hooks and won't open until the hooks are parted. The bits are loose fit and the middle bits are raised for ease of access. A lanyard hole is provided for portability. You may also use a bit of heat to bend the hooks inwards for a more secure hold, but it might become harder to open then.
I recommend printing the base and hooks out of PETG or better and the lid can be printed out of anything. Hooks need to be super glued to the matching recesses on the lid. Some of the holder holes must be worn in prior to use, I did this forcefully removing a bit while applying some sideways pressure to it. Hooks are printed sideways for better strength and the entire thing is printed by parts to avoid ugly changes in finish.
Also available for 60mm bits and holds 10.