E3D V6 Vise for Assembly or Hot-Tightening the Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small vise to hold an E3D V6 hot end for assembly/work
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small E3D V6 Vise for Assembly or Hot-Tightening the Nozzle.
Hardware required:
2 ea. M3 x 35 screws
2 ea. M3 nuts
2 ea, M3 washers
I added aluminum duct tape to the base for some heat resistance since my main use for this is to hot-tighten the nozzle. I have a separate control board/screen with the E3D V6 quick-connect wiring harness & cooling fan so that I can perform the hot-tightening procedure off the printer.
Printed in Atomic Bug-Eye PLA.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.