1 / 5
Base for Frozen 2 Water Spirit Horse
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stabilizing base for Frozen 2 water spirit horse toy
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
A friend's daughter had a toy water spirit horse from Frozen 2 (The Nokk) that would barely stand up on it's own. I designed a simple base that could be bonded to it's feet with epoxy. I used Matterhackers Build Translucent Blue PETG filament and she seems quite happy with both the added stability and the aesthetic. I hope someone else finds this useful.
Print Parameters:
- PLA would work, but I would recommend PETG for a little extra resilience since it's a toy and I was trying to minimize the amount of material.
- 0.3mm layer height. I found this sufficient for appearance and I wanted some good “tooth” in the foot cups for the epoxy to key into.
- 4 walls
- 25% Gyroid infill