1 / 5
Base for Frozen 2 Water Spirit Horse
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stabilizing base for Frozen 2 water spirit horse toy
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 89
- Makes
- 0
- Views
- 1,027
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
A friend's daughter had a toy water spirit horse from Frozen 2 (The Nokk) that would barely stand up on it's own. I designed a simple base that could be bonded to it's feet with epoxy. I used Matterhackers Build Translucent Blue PETG filament and she seems quite happy with both the added stability and the aesthetic. I hope someone else finds this useful.
Print Parameters:
- PLA would work, but I would recommend PETG for a little extra resilience since it's a toy and I was trying to minimize the amount of material.
- 0.3mm layer height. I found this sufficient for appearance and I wanted some good “tooth” in the foot cups for the epoxy to key into.
- 4 walls
- 25% Gyroid infill