Sigma 70-300mm 1:4-5.6 (Canon EF) Autofocus Gear Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement gear for the autofocus mechanism of a Sigma 70-300mm 1:4-5.6 lens (Specifically the Canon EF mount)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I bought a used Sigma 70-300mm lens from a garage sale ages ago. It had some issues with the autofocus system randomly binding up. Ended up taking it apart and finding a small gear had a few teeth stripped off.
I printed this gear with a 0.25mm nozzle, I am unsure if anything bigger would work well. I used This Guide in order to take a good chunk of the lens apart, unfortunately the gear train isn't the same but it's not hard to figure out once you get to it. I also printed the gear in PETG.
If you want to sell this part yourself feel free to do so as I believe parts like this should be more easily accessible, likewise if you need to make a separate gear here is some useful info to save yourself time reverse engineering:
Pressure Angel: 14.5deg
Module: 0.30